#

# WARNING: heavily refactored in 0.9.0 release. Please review and

# customize settings for your setup.

#

# Changes: in most of the cases you should not modify this

# file, but provide customizations in jail.local file,

# or separate .conf files under jail.d/ directory, e.g.:

#

# HOW TO ACTIVATE JAILS:

#

# YOU SHOULD NOT MODIFY THIS FILE.

#

# It will probably be overwritten or improved in a distribution update.

#

# Provide customizations in a jail.local file or a jail.d/customisation.local.

# For example to change the default bantime for all jails and to enable the

# ssh-iptables jail the following (uncommented) would appear in the .local file.

# See man 5 jail.conf for details.

#

# [DEFAULT]

# bantime = 1h

#

# [sshd]

# enabled = true

#

# See jail.conf(5) man page for more information

# Comments: use '#' for comment lines and ';' (following a space) for inline comments

[INCLUDES]

#before = paths-distro.conf

before = paths-debian.conf

# The DEFAULT allows a global definition of the options. They can be overridden

# in each jail afterwards.

[DEFAULT]

#

# MISCELLANEOUS OPTIONS

#

# "bantime.increment" allows to use database for searching of previously banned ip's to increase a

# default ban time using special formula, default it is banTime * 1, 2, 4, 8, 16, 32...

#bantime.increment = true

# "bantime.rndtime" is the max number of seconds using for mixing with random time

# to prevent "clever" botnets calculate exact time IP can be unbanned again:

#bantime.rndtime =

# "bantime.maxtime" is the max number of seconds using the ban time can reach (doesn't grow further)

#bantime.maxtime =

# "bantime.factor" is a coefficient to calculate exponent growing of the formula or common multiplier,

# default value of factor is 1 and with default value of formula, the ban time

# grows by 1, 2, 4, 8, 16 ...

#bantime.factor = 1

# "bantime.formula" used by default to calculate next value of ban time, default value below,

# the same ban time growing will be reached by multipliers 1, 2, 4, 8, 16, 32...

#bantime.formula = ban.Time * (1<<(ban.Count if ban.Count<20 else 20)) * banFactor

#

# more aggressive example of formula has the same values only for factor "2.0 / 2.885385" :

#bantime.formula = ban.Time * math.exp(float(ban.Count+1)*banFactor)/math.exp(1*banFactor)

# "bantime.multipliers" used to calculate next value of ban time instead of formula, corresponding

# previously ban count and given "bantime.factor" (for multipliers default is 1);

# following example grows ban time by 1, 2, 4, 8, 16 ... and if last ban count greater as multipliers count,

# always used last multiplier (64 in example), for factor '1' and original ban time 600 - 10.6 hours

#bantime.multipliers = 1 2 4 8 16 32 64

# following example can be used for small initial ban time (bantime=60) - it grows more aggressive at begin,

# for bantime=60 the multipliers are minutes and equal: 1 min, 5 min, 30 min, 1 hour, 5 hour, 12 hour, 1 day, 2 day

#bantime.multipliers = 1 5 30 60 300 720 1440 2880

# "bantime.overalljails" (if true) specifies the search of IP in the database will be executed

# cross over all jails, if false (default), only current jail of the ban IP will be searched

#bantime.overalljails = false

# --------------------

# "ignoreself" specifies whether the local resp. own IP addresses should be ignored

# (default is true). Fail2ban will not ban a host which matches such addresses.

#ignoreself = true

# "ignoreip" can be a list of IP addresses, CIDR masks or DNS hosts. Fail2ban

# will not ban a host which matches an address in this list. Several addresses

# can be defined using space (and/or comma) separator.

#ignoreip = 127.0.0.1/8 ::1

# External command that will take an tagged arguments to ignore, e.g. <ip>,

# and return true if the IP is to be ignored. False otherwise.

#

# ignorecommand = /path/to/command <ip>

ignorecommand =

# "bantime" is the amount of time that a host is banned, integer in seconds or

# time abbreviation format (m - minutes, h - hours, d - days, w - weeks, mo - months, y - years).

# This is to consider as an initial time if bantime.increment gets enabled.

bantime = 10m

# A host is banned if it has generated "maxretry" during the last "findtime"

# seconds.

findtime = 10m

# "maxretry" is the number of failures before a host get banned.

maxretry = 5

# "maxmatches" is the number of matches stored in ticket (resolvable via tag <matches> in actions).

maxmatches = %(maxretry)s

# "backend" specifies the backend used to get files modification.

# Available options are "pyinotify", "polling", "systemd" and "auto".

# This option can be overridden in each jail as well.

#

# pyinotify: requires pyinotify (a file alteration monitor) to be installed.

# If pyinotify is not installed, Fail2ban will use auto.

# polling: uses a polling algorithm which does not require external libraries.

# systemd: uses systemd python library to access the systemd journal.

# Specifying "logpath" is not valid for this backend.

# See "journalmatch" in the jails associated filter config

# auto: will try to use the following backends, in order:

# pyinotify, polling.

#

# Note: if systemd backend is chosen as the default but you enable a jail

# for which logs are present only in its own log files, specify some other

# backend for that jail (e.g. polling) and provide empty value for

# journalmatch. See https://github.com/fail2ban/fail2ban/issues/959#issuecomment-74901200

backend = auto

# "usedns" specifies if jails should trust hostnames in logs,

# warn when DNS lookups are performed, or ignore all hostnames in logs

#

# yes: if a hostname is encountered, a DNS lookup will be performed.

# warn: if a hostname is encountered, a DNS lookup will be performed,

# but it will be logged as a warning.

# no: if a hostname is encountered, will not be used for banning,

# but it will be logged as info.

# raw: use raw value (no hostname), allow use it for no-host filters/actions (example user)

usedns = warn

# "logencoding" specifies the encoding of the log files handled by the jail

# This is used to decode the lines from the log file.

# Typical examples: "ascii", "utf-8"

#

# auto: will use the system locale setting

logencoding = auto

# "enabled" enables the jails.

# By default all jails are disabled, and it should stay this way.

# Enable only relevant to your setup jails in your .local or jail.d/*.conf

#

# true: jail will be enabled and log files will get monitored for changes

# false: jail is not enabled

enabled = false

# "mode" defines the mode of the filter (see corresponding filter implementation for more info).

mode = normal

# "filter" defines the filter to use by the jail.

# By default jails have names matching their filter name

#

filter = %(__name__)s[mode=%(mode)s]

#

# ACTIONS

#

# Some options used for actions

# Destination email address used solely for the interpolations in

# jail.{conf,local,d/*} configuration files.

destemail = root@localhost

# Sender email address used solely for some actions

sender = root@<fq-hostname>

# E-mail action. Since 0.8.1 Fail2Ban uses sendmail MTA for the

# mailing. Change mta configuration parameter to mail if you want to

# revert to conventional 'mail'.

mta = sendmail

# Default protocol

protocol = tcp

# Specify chain where jumps would need to be added in ban-actions expecting parameter chain

chain = <known/chain>

# Ports to be banned

# Usually should be overridden in a particular jail

port = 0:65535

# Format of user-agent https://tools.ietf.org/html/rfc7231#section-5.5.3

fail2ban_agent = Fail2Ban/%(fail2ban_version)s

#

# Action shortcuts. To be used to define action parameter

# Default banning action (e.g. iptables, iptables-new,

# iptables-multiport, shorewall, etc) It is used to define

# action_* variables. Can be overridden globally or per

# section within jail.local file

#banaction = iptables-multiport

#banaction_allports = iptables-allports

# The simplest action to take: ban only

action_ = %(banaction)s[port="%(port)s", protocol="%(protocol)s", chain="%(chain)s"]

# ban & send an e-mail with whois report to the destemail.

action_mw = %(action_)s

%(mta)s-whois[sender="%(sender)s", dest="%(destemail)s", protocol="%(protocol)s", chain="%(chain)s"]

# ban & send an e-mail with whois report and relevant log lines

# to the destemail.

action_mwl = %(action_)s

%(mta)s-whois-lines[sender="%(sender)s", dest="%(destemail)s", logpath="%(logpath)s", chain="%(chain)s"]

# See the IMPORTANT note in action.d/xarf-login-attack for when to use this action

#

# ban & send a xarf e-mail to abuse contact of IP address and include relevant log lines

# to the destemail.

action_xarf = %(action_)s

xarf-login-attack[service=%(__name__)s, sender="%(sender)s", logpath="%(logpath)s", port="%(port)s"]

# ban & send a notification to one or more of the 50+ services supported by Apprise.

# See https://github.com/caronc/apprise/wiki for details on what is supported.

#

# You may optionally over-ride the default configuration line (containing the Apprise URLs)

# by using 'apprise[config="/alternate/path/to/apprise.cfg"]' otherwise

# /etc/fail2ban/apprise.conf is sourced for your supported notification configuration.

# action = %(action_)s

# apprise

# ban IP on CloudFlare & send an e-mail with whois report and relevant log lines

# to the destemail.

action_cf_mwl = cloudflare[cfuser="%(cfemail)s", cftoken="%(cfapikey)s"]

%(mta)s-whois-lines[sender="%(sender)s", dest="%(destemail)s", logpath="%(logpath)s", chain="%(chain)s"]

# Report block via blocklist.de fail2ban reporting service API

#

# See the IMPORTANT note in action.d/blocklist_de.conf for when to use this action.

# Specify expected parameters in file action.d/blocklist_de.local or if the interpolation

# `action_blocklist_de` used for the action, set value of `blocklist_de_apikey`

# in your `jail.local` globally (section [DEFAULT]) or per specific jail section (resp. in

# corresponding jail.d/my-jail.local file).

#

action_blocklist_de = blocklist_de[email="%(sender)s", service="%(__name__)s", apikey="%(blocklist_de_apikey)s", agent="%(fail2ban_agent)s"]

# Report ban via abuseipdb.com.

#

# See action.d/abuseipdb.conf for usage example and details.

#

action_abuseipdb = abuseipdb

# Choose default action. To change, just override value of 'action' with the

# interpolation to the chosen action shortcut (e.g. action_mw, action_mwl, etc) in jail.local

# globally (section [DEFAULT]) or per specific section

action = %(action_)s

#

# JAILS

#

#

# SSH servers

#

[sshd]

# To use more aggressive sshd modes set filter parameter "mode" in jail.local:

# normal (default), ddos, extra or aggressive (combines all).

# See "tests/files/logs/sshd" or "filter.d/sshd.conf" for usage example and details.

#mode = normal

port = ssh

logpath = %(sshd_log)s

backend = %(sshd_backend)s

[dropbear]

port = ssh

logpath = %(dropbear_log)s

backend = %(dropbear_backend)s

[selinux-ssh]

port = ssh

logpath = %(auditd_log)s

#

# HTTP servers

#

[apache-auth]

port = http,https

logpath = %(apache_error_log)s

[apache-badbots]

# Ban hosts which agent identifies spammer robots crawling the web

# for email addresses. The mail outputs are buffered.

port = http,https

logpath = %(apache_access_log)s

bantime = 48h

maxretry = 1

[apache-noscript]

port = http,https

logpath = %(apache_error_log)s

[apache-overflows]

port = http,https

logpath = %(apache_error_log)s

maxretry = 2

[apache-nohome]

port = http,https

logpath = %(apache_error_log)s

maxretry = 2

[apache-botsearch]

port = http,https

logpath = %(apache_error_log)s

maxretry = 2

[apache-fakegooglebot]

port = http,https

logpath = %(apache_access_log)s

maxretry = 1

ignorecommand = %(fail2ban_confpath)s/filter.d/ignorecommands/apache-fakegooglebot <ip>

[apache-modsecurity]

port = http,https

logpath = %(apache_error_log)s

maxretry = 2

[apache-shellshock]

port = http,https

logpath = %(apache_error_log)s

maxretry = 1

[openhab-auth]

filter = openhab

banaction = %(banaction_allports)s

logpath = /opt/openhab/logs/request.log

# To use more aggressive http-auth modes set filter parameter "mode" in jail.local:

# normal (default), aggressive (combines all), auth or fallback

# See "tests/files/logs/nginx-http-auth" or "filter.d/nginx-http-auth.conf" for usage example and details.

[nginx-http-auth]

# mode = normal

port = http,https

logpath = %(nginx_error_log)s

# To use 'nginx-limit-req' jail you should have `ngx_http_limit_req_module`

# and define `limit_req` and `limit_req_zone` as described in nginx documentation

# http://nginx.org/en/docs/http/ngx_http_limit_req_module.html

# or for example see in 'config/filter.d/nginx-limit-req.conf'

[nginx-limit-req]

port = http,https

logpath = %(nginx_error_log)s

[nginx-botsearch]

port = http,https

logpath = %(nginx_error_log)s

[nginx-bad-request]

port = http,https

logpath = %(nginx_access_log)s

[nginx-forbidden]

port = http,https

logpath = %(nginx_error_log)s

# Ban attackers that try to use PHP's URL-fopen() functionality

# through GET/POST variables. - Experimental, with more than a year

# of usage in production environments.

[php-url-fopen]

port = http,https

logpath = %(nginx_access_log)s

%(apache_access_log)s

[suhosin]

port = http,https

logpath = %(suhosin_log)s

[lighttpd-auth]

# Same as above for Apache's mod_auth

# It catches wrong authentifications

port = http,https

logpath = %(lighttpd_error_log)s

#

# Webmail and groupware servers

#

[roundcube-auth]

port = http,https

logpath = %(roundcube_errors_log)s

# Use following line in your jail.local if roundcube logs to journal.

#backend = %(syslog_backend)s

[openwebmail]

port = http,https

logpath = /var/log/openwebmail.log

[horde]

port = http,https

logpath = /var/log/horde/horde.log

[groupoffice]

port = http,https

logpath = /home/groupoffice/log/info.log

[sogo-auth]

# Monitor SOGo groupware server

# without proxy this would be:

# port = 20000

port = http,https

logpath = /var/log/sogo/sogo.log

[tine20]

logpath = /var/log/tine20/tine20.log

port = http,https

#

# Web Applications

#

#

[drupal-auth]

port = http,https

logpath = %(syslog_daemon)s

backend = %(syslog_backend)s

[guacamole]

port = http,https

logpath = /var/log/tomcat*/catalina.out

#logpath = /var/log/guacamole.log

[monit]

#Ban clients brute-forcing the monit gui login

port = 2812

logpath = /var/log/monit

/var/log/monit.log

[webmin-auth]

port = 10000

logpath = %(syslog_authpriv)s

backend = %(syslog_backend)s

[froxlor-auth]

port = http,https

logpath = %(syslog_authpriv)s

backend = %(syslog_backend)s

#

# HTTP Proxy servers

#

#

[squid]

port = 80,443,3128,8080

logpath = /var/log/squid/access.log

[3proxy]

port = 3128

logpath = /var/log/3proxy.log

#

# FTP servers

#

[proftpd]

port = ftp,ftp-data,ftps,ftps-data

logpath = %(proftpd_log)s

backend = %(proftpd_backend)s

[pure-ftpd]

port = ftp,ftp-data,ftps,ftps-data

logpath = %(pureftpd_log)s

backend = %(pureftpd_backend)s

[gssftpd]

port = ftp,ftp-data,ftps,ftps-data

logpath = %(syslog_daemon)s

backend = %(syslog_backend)s

[wuftpd]

port = ftp,ftp-data,ftps,ftps-data

logpath = %(wuftpd_log)s

backend = %(wuftpd_backend)s

[vsftpd]

# or overwrite it in jails.local to be

# logpath = %(syslog_authpriv)s

# if you want to rely on PAM failed login attempts

# vsftpd's failregex should match both of those formats

port = ftp,ftp-data,ftps,ftps-data

logpath = %(vsftpd_log)s

#

# Mail servers

#

# ASSP SMTP Proxy Jail

[assp]

port = smtp,465,submission

logpath = /root/path/to/assp/logs/maillog.txt

[courier-smtp]

port = smtp,465,submission

logpath = %(syslog_mail)s

backend = %(syslog_backend)s

[postfix]

# To use another modes set filter parameter "mode" in jail.local:

mode = more

port = smtp,465,submission

logpath = %(postfix_log)s

backend = %(postfix_backend)s

[postfix-rbl]

filter = postfix[mode=rbl]

port = smtp,465,submission

logpath = %(postfix_log)s

backend = %(postfix_backend)s

maxretry = 1

[sendmail-auth]

port = submission,465,smtp

logpath = %(syslog_mail)s

backend = %(syslog_backend)s

[sendmail-reject]

# To use more aggressive modes set filter parameter "mode" in jail.local:

# normal (default), extra or aggressive

# See "tests/files/logs/sendmail-reject" or "filter.d/sendmail-reject.conf" for usage example and details.

#mode = normal

port = smtp,465,submission

logpath = %(syslog_mail)s

backend = %(syslog_backend)s

[qmail-rbl]

filter = qmail

port = smtp,465,submission

logpath = /service/qmail/log/main/current

# dovecot defaults to logging to the mail syslog facility

# but can be set by syslog_facility in the dovecot configuration.

[dovecot]

port = pop3,pop3s,imap,imaps,submission,465,sieve

logpath = %(dovecot_log)s

backend = %(dovecot_backend)s

[sieve]

port = smtp,465,submission

logpath = %(dovecot_log)s

backend = %(dovecot_backend)s

[solid-pop3d]

port = pop3,pop3s

logpath = %(solidpop3d_log)s

[exim]

# see filter.d/exim.conf for further modes supported from filter:

#mode = normal

port = smtp,465,submission

logpath = %(exim_main_log)s

[exim-spam]

port = smtp,465,submission

logpath = %(exim_main_log)s

[kerio]

port = imap,smtp,imaps,465

logpath = /opt/kerio/mailserver/store/logs/security.log

#

# Mail servers authenticators: might be used for smtp,ftp,imap servers, so

# all relevant ports get banned

#

[courier-auth]

port = smtp,465,submission,imap,imaps,pop3,pop3s

logpath = %(syslog_mail)s

backend = %(syslog_backend)s

[postfix-sasl]

filter = postfix[mode=auth]

port = smtp,465,submission,imap,imaps,pop3,pop3s

# You might consider monitoring /var/log/mail.warn instead if you are

# running postfix since it would provide the same log lines at the

# "warn" level but overall at the smaller filesize.

logpath = %(postfix_log)s

backend = %(postfix_backend)s

[perdition]

port = imap,imaps,pop3,pop3s

logpath = %(syslog_mail)s

backend = %(syslog_backend)s

[squirrelmail]

port = smtp,465,submission,imap,imap2,imaps,pop3,pop3s,http,https,socks

logpath = /var/lib/squirrelmail/prefs/squirrelmail_access_log

[cyrus-imap]

port = imap,imaps

logpath = %(syslog_mail)s

backend = %(syslog_backend)s

[uwimap-auth]

port = imap,imaps

logpath = %(syslog_mail)s

backend = %(syslog_backend)s

#

#

# DNS servers

#

# !!! WARNING !!!

# Since UDP is connection-less protocol, spoofing of IP and imitation

# of illegal actions is way too simple. Thus enabling of this filter

# might provide an easy way for implementing a DoS against a chosen

# victim. See

# http://nion.modprobe.de/blog/archives/690-fail2ban-+-dns-fail.html

# Please DO NOT USE this jail unless you know what you are doing.

#

# IMPORTANT: see filter.d/named-refused for instructions to enable logging

# This jail blocks UDP traffic for DNS requests.

# [named-refused-udp]

#

# filter = named-refused

# port = domain,953

# protocol = udp

# logpath = /var/log/named/security.log

# IMPORTANT: see filter.d/named-refused for instructions to enable logging

# This jail blocks TCP traffic for DNS requests.

[named-refused]

port = domain,953

logpath = /var/log/named/security.log

[nsd]

port = 53

action_ = %(default/action_)s[name=%(__name__)s-tcp, protocol="tcp"]

%(default/action_)s[name=%(__name__)s-udp, protocol="udp"]

logpath = /var/log/nsd.log

#

# Miscellaneous

#

[asterisk]

port = 5060,5061

action_ = %(default/action_)s[name=%(__name__)s-tcp, protocol="tcp"]

%(default/action_)s[name=%(__name__)s-udp, protocol="udp"]

logpath = /var/log/asterisk/messages

maxretry = 10

[freeswitch]

port = 5060,5061

action_ = %(default/action_)s[name=%(__name__)s-tcp, protocol="tcp"]

%(default/action_)s[name=%(__name__)s-udp, protocol="udp"]

logpath = /var/log/freeswitch.log

maxretry = 10

# enable adminlog; it will log to a file inside znc's directory by default.

[znc-adminlog]

port = 6667

logpath = /var/lib/znc/moddata/adminlog/znc.log

# To log wrong MySQL access attempts add to /etc/my.cnf in [mysqld] or

# equivalent section:

# log-warnings = 2

#

# for syslog (daemon facility)

# [mysqld_safe]

# syslog

#

# for own logfile

# [mysqld]

# log-error=/var/log/mysqld.log

[mysqld-auth]

port = 3306

logpath = %(mysql_log)s

backend = %(mysql_backend)s

[mssql-auth]

# Default configuration for Microsoft SQL Server for Linux

# See the 'mssql-conf' manpage how to change logpath or port

logpath = /var/opt/mssql/log/errorlog

port = 1433

filter = mssql-auth

# Log wrong MongoDB auth (for details see filter 'filter.d/mongodb-auth.conf')

[mongodb-auth]

# change port when running with "--shardsvr" or "--configsvr" runtime operation

port = 27017

logpath = /var/log/mongodb/mongodb.log

# Jail for more extended banning of persistent abusers

# !!! WARNINGS !!!

# 1. Make sure that your loglevel specified in fail2ban.conf/.local

# is not at DEBUG level -- which might then cause fail2ban to fall into

# an infinite loop constantly feeding itself with non-informative lines

# 2. Increase dbpurgeage defined in fail2ban.conf to e.g. 648000 (7.5 days)

# to maintain entries for failed logins for sufficient amount of time

[recidive]

logpath = /var/log/fail2ban.log

banaction = %(banaction_allports)s

bantime = 1w

findtime = 1d

# Generic filter for PAM. Has to be used with action which bans all

# ports such as iptables-allports, shorewall

[pam-generic]

# pam-generic filter can be customized to monitor specific subset of 'tty's

banaction = %(banaction_allports)s

logpath = %(syslog_authpriv)s

backend = %(syslog_backend)s

[xinetd-fail]

banaction = iptables-multiport-log

logpath = %(syslog_daemon)s

backend = %(syslog_backend)s

maxretry = 2

# stunnel - need to set port for this

[stunnel]

logpath = /var/log/stunnel4/stunnel.log

[ejabberd-auth]

port = 5222

logpath = /var/log/ejabberd/ejabberd.log

[counter-strike]

logpath = /opt/cstrike/logs/L[0-9]*.log

tcpport = 27030,27031,27032,27033,27034,27035,27036,27037,27038,27039

udpport = 1200,27000,27001,27002,27003,27004,27005,27006,27007,27008,27009,27010,27011,27012,27013,27014,27015

action_ = %(default/action_)s[name=%(__name__)s-tcp, port="%(tcpport)s", protocol="tcp"]

%(default/action_)s[name=%(__name__)s-udp, port="%(udpport)s", protocol="udp"]

[softethervpn]

port = 500,4500

protocol = udp

logpath = /usr/local/vpnserver/security_log/*/sec.log

[gitlab]

port = http,https

logpath = /var/log/gitlab/gitlab-rails/application.log

[grafana]

port = http,https

logpath = /var/log/grafana/grafana.log

[bitwarden]

port = http,https

logpath = /home/*/bwdata/logs/identity/Identity/log.txt

[centreon]

port = http,https

logpath = /var/log/centreon/login.log

# consider low maxretry and a long bantime

# nobody except your own Nagios server should ever probe nrpe

[nagios]

logpath = %(syslog_daemon)s ; nrpe.cfg may define a different log_facility

backend = %(syslog_backend)s

maxretry = 1

[oracleims]

# see "oracleims" filter file for configuration requirement for Oracle IMS v6 and above

logpath = /opt/sun/comms/messaging64/log/mail.log_current

banaction = %(banaction_allports)s

[directadmin]

logpath = /var/log/directadmin/login.log

port = 2222

[portsentry]

logpath = /var/lib/portsentry/portsentry.history

maxretry = 1

[pass2allow-ftp]

# this pass2allow example allows FTP traffic after successful HTTP authentication

port = ftp,ftp-data,ftps,ftps-data

# knocking_url variable must be overridden to some secret value in jail.local

knocking_url = /knocking/

filter = apache-pass[knocking_url="%(knocking_url)s"]

# access log of the website with HTTP auth

logpath = %(apache_access_log)s

blocktype = RETURN

returntype = DROP

action = %(action_)s[blocktype=%(blocktype)s, returntype=%(returntype)s,

actionstart_on_demand=false, actionrepair_on_unban=true]

bantime = 1h

maxretry = 1

findtime = 1

[murmur]

# AKA mumble-server

port = 64738

action_ = %(default/action_)s[name=%(__name__)s-tcp, protocol="tcp"]

%(default/action_)s[name=%(__name__)s-udp, protocol="udp"]

logpath = /var/log/mumble-server/mumble-server.log

[screensharingd]

# For Mac OS Screen Sharing Service (VNC)

logpath = /var/log/system.log

logencoding = utf-8

[haproxy-http-auth]

# HAProxy by default doesn't log to file you'll need to set it up to forward

# logs to a syslog server which would then write them to disk.

# See "haproxy-http-auth" filter for a brief cautionary note when setting

# maxretry and findtime.

logpath = /var/log/haproxy.log

[slapd]

port = ldap,ldaps

logpath = /var/log/slapd.log

[domino-smtp]

port = smtp,ssmtp

logpath = /home/domino01/data/IBM_TECHNICAL_SUPPORT/console.log

[phpmyadmin-syslog]

port = http,https

logpath = %(syslog_authpriv)s

backend = %(syslog_backend)s

[routeros-auth]

port = ssh,http,https

logpath = /var/log/MikroTik/router.log

[zoneminder]

# Zoneminder HTTP/HTTPS web interface auth

# Logs auth failures to apache2 error log

port = http,https

logpath = %(apache_error_log)s

[traefik-auth]

# to use 'traefik-auth' filter you have to configure your Traefik instance,

# see `filter.d/traefik-auth.conf` for details and service example.

port = http,https

logpath = /var/log/traefik/access.log

[scanlogd]

logpath = %(syslog_local0)s

banaction = %(banaction_allports)s

[monitorix]

port = 8080

logpath = /var/log/monitorix-httpd

[dante]

port = 1080

logpath = %(syslog_daemon)s